Cristec YPOWER 36/12-30A DC/DC Battery Charger
DC/DC converters are used, depending on the model, to step up or to step down a DC voltage or to provide the same voltage but stabilised. They can be used to charge one battery bank from another.
Silent Operation - Passively cooled
Lithium Ready - Can be used with LiFePO4 (Lithium) batteries
Connected - Bluetooth and CAN-BUS connectivity
No Derating - Up to +60°C (140°F) with no loss
Cristec DCDC Converters are all galvanically isolated.
DC/DC converters are used, depending on the model, to step up or to step down a DC voltage or to provide the same voltage but stabilised. They can be used to charge one battery bank from another.
Silent Operation - Passively cooled
Lithium Ready - Can be used with LiFePO4 (Lithium) batteries
Connected - Bluetooth and CAN-BUS connectivity
No Derating - Up to +60°C (140°F) with no loss
Cristec DCDC Converters are all galvanically isolated.
DC/DC converters are used, depending on the model, to step up or to step down a DC voltage or to provide the same voltage but stabilised. They can be used to charge one battery bank from another.
Silent Operation - Passively cooled
Lithium Ready - Can be used with LiFePO4 (Lithium) batteries
Connected - Bluetooth and CAN-BUS connectivity
No Derating - Up to +60°C (140°F) with no loss
Cristec DCDC Converters are all galvanically isolated.
Overview
DC/DC Converters can be used (depending on model) for three distinct purposes:
1. To provide a supply of power for a device which uses a different voltage from the service voltage available on the vessel.
2. Convert a service voltage into a different voltage to facilitate battery-to-battery charging. This option can be accomplished in a simply way using a DC/DC converter with an output voltage that is slightly higher than the resulting voltage of the battery. Cristec DC/DC chargers output is adjustable resulting in a modern 5-stage charger.
3. To stabilise power. When devices such as electric winches, bowthrusters or even powerful inverters are connected to the service batteries, they may cause a dip in voltage when used. This might affect navigation instruments, causing them to switch off and then back on again. This would be disruptive and may cause stored information to be lost. In this case a DC/DC converter which has the same nominal input voltage as its output voltage will act as a stabilised power supply. The input voltage may drop but the output voltage will remain at the exact voltage you have set using the internal potentiomenter. The current drawn from the input will rise to compensate for the drop in that voltage, ensuring the output power remains stable.
Specs
Input Voltage (VDC) - 30-48
Output Voltage (VDC) - 12-15
Output Current (A) - 30
Rated Power (W) - 570