Installation Kit
Our installation kit contains the same high quality parts we use in our own installations and is the most comprehensive kit available on the market. Each sub-kit is boxed separately to make it easy for you or your installer to plan and carry out your installation efficiently.
Please note that we can modify any kit to suit a particular requirement whether it is to accommodate equipment already present or it is to comply with regulations such as MCA coding. To comply with Inland Waterways Boat Safety Scheme, we can provide fuel filters with metal bowls.
Please contact us if you can't see your generator listed above.
Our installation kit contains the same high quality parts we use in our own installations and is the most comprehensive kit available on the market. Each sub-kit is boxed separately to make it easy for you or your installer to plan and carry out your installation efficiently.
Please note that we can modify any kit to suit a particular requirement whether it is to accommodate equipment already present or it is to comply with regulations such as MCA coding. To comply with Inland Waterways Boat Safety Scheme, we can provide fuel filters with metal bowls.
Please contact us if you can't see your generator listed above.
Our installation kit contains the same high quality parts we use in our own installations and is the most comprehensive kit available on the market. Each sub-kit is boxed separately to make it easy for you or your installer to plan and carry out your installation efficiently.
Please note that we can modify any kit to suit a particular requirement whether it is to accommodate equipment already present or it is to comply with regulations such as MCA coding. To comply with Inland Waterways Boat Safety Scheme, we can provide fuel filters with metal bowls.
Please contact us if you can't see your generator listed above.
This Kit Includes
All kits including the following items:
Sea water supply system using bronze or DZR hull fittings and including water hose
Fuel supply system with fuel filter/water separator and A1 grade fuel hose
Exhaust system with Lloyds-approved exhaust hose and a waterlock/muffler
Hose Clips for all the above hose
AC electrical protection system in enclosure and Shore/Off/Gen Changeover switch
You can use the main engine start battery, otherwise you will require:
Start battery 55 Ah
Battery box (if battery used)
Additionally, for a standard installation, you will typically need the following items:
Sealant - 3M: 4200, 5200 or SIKA: 221
Fuel supply - tank standpipe fittings may be required
Fuel return - tank pipe fittings (if used)
Pos and Neg battery cables - 2.5 mm² (2 minimum)
Suitable mounting base e.g. 1" marine ply