RCC-03 Remote Control Panel Kit
Remote control & programming centre - For all Xtenders
MRP: £ 313.57 (excl. VAT)
Our Price: £ 282.21 (excl. VAT)
Note: Our kit includes the panel, cable and BTS-01 temperature sensor.
This flush mounted remote control and programming centre is for use with all Xtender models. It allows you to survey the system and fully customise it to your needs by simply altering the parameters displayed on-screen. Providing clear and comprehensive information on the state of the system, the RCC-03 has a built-in clock and calender function so it can memorise and display events that have occured and the time and day it happened. The RCC-03 provides the facility to download all parameters and events records onto an SD card so that they can be sent by email for analysis.
Flush-mounted LCD display
This enables the control panel to be mounted on an instrument panel in a similar way to many other control panels. The display allows you to view information about the software and hardware of the equipment, the events record, a simple analogue clock with basic on/off and input current time setting, an 'active' schematic diagram showing what power is available where, a menu for changing the RCC set up and finally another for changing the Xtender set up.
More than one panel can be used in one system. The panels can be 'daisy-chained'. There are 4 RJ45 8-pin connectors in the back of the panel to allow for two different cable insertion angles (2 vertically from below and 2 horizontally from behind) allowing for different installation restrictions whilst ensuring there are two ports for 'daisy-chaining' more control panels if required.
SD Card Reader
Adjacent to the cable connection points is a slot for an SD Card (provided). This allows new software to be uploaded or settings and events records to be downloaded for analysis externally. The data is saved to the card, the card removed and connected to a card reader on a computer and the files can be copied and sent fro analysis attached to an email.
|Part Reference Number
||Remote control & programming centre - For all Xtenders
||Studer Innotec, Switzerland
|Manufacturer's Web Site
||Height: 130 mm
Length: 120 mm
Depth: 42.2 mm
||#6 CSK screws (provided)
||2 m RJ45 8-pin cable (standard)
5 m & 20 m options