You're currently on:

Cristec CPS 70-2A

24V / 3A Battery Charger

131-0121

MRP: £ 155.43 (excl. VAT)
Our Price: £ 147.66 (excl. VAT)

Compact, lightweight and aesthetic, CRISTEC CPS chargers (selective programmable charge) offer you all the safety and convenience that advanced technology in the battery charging area can bring you.
The whole CPS range provides a specific charge to the battery which is fully compliant with all of the battery manufacturer’s specifications. Entirely automatic, with built in charge distributor, these chargers can remain permanently connected to the battery in complete safety and do not have to be disconnected when starting the engine.

Suitable for use with AC generators. Can be used as a DC regulated and filtered power supply.

CPS battery chargers are supplied along with their AC cable and plug. You can connect the batteries externally on screw terminals.
Add Items to Cart

Free delivery to most mainland UK destinations - click here for details and exclusions

Additional Information

Features

Performance
The timed boost function may be selected depending on the charger mode of use.
Protection
The equipment is protected against polarity reversal and short-circuits; the entire CRISTEC CPS range is protected for marine use.
Charge
Three automatic charge cycles: boost, absorption, floating.
Programmable timed boost by internal dip switch.
Charge distributor incorporated into each battery output (2 outputs).
Selecting of the level of charge according to the type of battery by internal dip switch (Lead/Antimony ; Lead/Calcium).
Front display: LED for mains present and LED for charge status (boost/absorption, intermittent, floating, continuous).
Internal potentiometer allows output voltage to be adjusted.
Mechanical characteristics
Standard presentation in IP22 case with drip-proof cover.
Epoxy finish matt black RAL 9011 and grey RAL 7035, salt atmosphere resistant. Electronics card given tropicalised coating after mounting components.
Water-repellent varnish.
Supplied with mains cable and 230Vac plug.
Connection terminals to allow a direct cabling of the battery cables (-,+,+) without opening the charger.

Tech Specs

Part Reference Number 131-0121
Basic spec 24V / 3A Battery Charger
Weight (kg) 1.6000
Manufacturer Cristec, France
Manufacturer's Web Site www.cristec.fr
Options & Kits

Advance Yacht Systems can supply comprehensive installation kits with various options.
We also supply service kits and spares.

Input 115 - 230 Vac ±15% by internal switch
Input frequency Automatic from 47 - 63 Hz
Output Voltage 24 Vdc ± 1%
Output current 3 A
Outputs 2
Operating temp. range -10°C up to +40°C
Storage temp. range -20°C up to +70°C
Dimensions 160mm x 215mm x 80mm
Warranty 3 years

Options/Kits

Advance Yacht Systems can supply comprehensive installation kits with various options.
We also supply service kits and spares.